31mm 2 Port 180 dgree turn Non-Shared Diverter Cartridge / Shower & Kitchen Ceramic Cartridges & Plumbing Valves Manufacturer | Geann

31mm 2 Port 180 dgree turn Non-Shared Diverter Cartridge / Commercial Brass Shell Shower Ceramic Cartridges Manufacturer | Geann

1/2" Half Inch Ceramic Faucet Cartridge

1/2" Half Inch Ceramic Faucet Cartridge

Two Handle Faucet Ceramic Cartridge for Kitchen, Basin and Commercial Faucets and Taps.

More
G1/2" Thermostatic Mixing Valve

G1/2" Thermostatic Mixing Valve

G1/2" Thermostatic mixing valve for Anti-Scald Application which complied ASSE1070.

More

31mm 2 Port 180 dgree turn Non-Shared Diverter Cartridge | Shower & Kitchen Ceramic Cartridges & Plumbing Valves Manufacturer | Geann

Located in Taiwan since 1979, Geann Industrial Co., Ltd. has been a ceramic faucet cartridge and plumbing valve manufacturer. Their main plumbing valves and ceramic cartridge products include, 31mm 2 Port 180 dgree turn Non-Shared Diverter Cartridge, commercial brass shell shower ceramic cartridges, two handle faucet brass/ceramic cartridges, bathroom and kitchen plumbing valves, single handle mixing valve ceramic cartridges, ceramic diverter cartridges, water thermostatic mixing valves, anti-scald cartridges, and each valve cartridge is supplied with tracing code to ensure 100% quality control.

Geann's kitchen and shower plumbing valves and brass/ceramic cartridge cartridges are approved for use in the United Kingdom (WRAS), Germany (DVGW-KTW and W270), France (ACS), Australia (Watermark) and North America. Rough-in valves, diverter valve cartridges and plumbing valves are manufactured from high quality materials such as lead-free brass, and EU conflict-free brass. ISO 9001 and IECEx certifications are obtained for your ceramic cartridge orders.

Geann has been providing customers with high quality ceramic valve cartridges, both with advanced technology and 40 years of experience, Geann ensures that each customer's requirements are met.

31mm 2 Port 180 dgree turn Non-Shared Diverter Cartridge

GN-35P-D2-7

31mm 2 Port 180 dgree turn Non-Shared Diverter Cartridge

31mm 2 Port 180 dgree turn Non-Shared Diverter Cartridge
31mm 2 Port 180 dgree turn Non-Shared Diverter Cartridge

GN-35P-D2-7 is the non-share diverter cartridge in 31mm diameter. This diverter cartridge will spread the water into two outlets without any mixing in the rotation operation. The Non-Shared Function by GN-35P-D2-7 provides the shower valves to comply with CAL-Green regulation. There is no detent or stop point in the middle of swithing for stopping water. Total travel angle of GN-35P-D2-7 is 180 degree between two outlets with clear detents on both ends.

Silent but Clear Positioning Detent
Geann designed detent provides slient but clear positioning indication during switching between ports. All the Geann diverter cartridges are equipped in Silent Clear Detent. The positioning indication will be still clear after long-time usage.
CalGreen Compliance
Use Geann Non-Shared Diverter Cartridge to comply your shower valve system with CalGreen and being CalGreen-Compliant. CalGreen regulation limits the flow to no more than 2.0 gallons-per-minutes from switching port to port (shower head to hand shower or hand shower to shower head). In other words, there is only one outlet to run from either shower head or hand shower, but not in both. The diverter cartridge needs to close one port before switching the flow to other ports.

Flow Pattern Diagram

GN-35P-D2-7 provides Non-Shared divetering Function for 180 degree in total travel angle. There will be no mixing when the direction passed from Outlet A to Outlet B.

Features

  • It can be a replacement of brass diverter.
  • Economic and competitive cost.
  • Lead free, Eco-friendly product. It meets California AB1953 / ROHS / NSF61-9.
  • Certifications: NSF / IAPMO / WRAS / ACS / KTW-DVGW / W270 / WATERMARK.
  • Water Outlet: 2

Technical Information

  • Water Pressure: 0 - 5 Bar (Recommend value)
  • Cap Tightening Torque: 8 ~ 10 N-m
  • Stem Operation Torque: 5.1 N-m (Max)
  • Ceramic Disc Material: AL2O3 92% - 96%
  • Temperature: 90°C (Max), Normal usage 65°C
  • Endurance Test: 15000 (ASMEA112.18.1 5.6 standard)
  • Cal-Green Compliance

Flow Rate

GN-35P-D2-7-flow rate curve

Product Instruction Manual

31mm_D2_Machine_Detail.jpg
Valve Body Machining Detail of Geann 31mm Cartridge.

The Order Process and Lead Time

Send inquiry to Geann, we'll answer you within 1 day.
We provide free samples as you required
Once the order confirm and payment received, prodution lead time is less than 30 days.

Photo Gallery
Files Download


Press Release